Wiring ready
TZR125 Track Bike
Took me a wile, du to other projects but finally finished it.
Charging system and electric starter all is working correct now.
Charging system and electric starter all is working correct now.
Because I'm running without airfilter, like to hold the carb as free as possible.
Therefore tightened all wires close to the frame.
Therefore tightened all wires close to the frame.
As you can see, got a good clearance all around the carb.
Should be easy to work on
Should be easy to work on
Tightened the wiring from the dash more, so it could move/vibrate freely
And the on/off swish is located next to the battery holder.
Nice and tight and a little bit out off site.
Nice and tight and a little bit out off site.
Need to do some small thinks, but think I can dyno here next week to see where we are.
Could be interesting to see
Could be interesting to see